CO2 Jet DMX Adjustable

Keeping the same simple Co2 Jet design as CryoFX DMX Switchable unit and adding the ability to angle the entire unit as well as provide the option to remove the baseplate (used for stage or ground positioning) for mounting on truss, this DMX Adjustable Co2 Jet is another industry standard when coming across co2 jets. The hose and CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the CO2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet “In” jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX “on” (to use with DMX 512 controllers) or “off” to use as a standard Cryo Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit). Assigned to DMX channel 1, the ideal DMX controller to use with this unit is one with a “Flash” button (button that only send signal when held down), similar to ones used for strobe lights and fog machines. Depending on which DMX controller/system you are using, this jet may only function on channel 1 as the design is implemented to accept DMX signal, therefore unavailable on other channels. This CO2 Jet shoots a 25’ - 35’ foot high stream of CO2 which is about 4’-6’ feet wide! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the jet so the cloud vanishes in seconds after the user stops activation.

This package comes with the following:

• DMX Adjustable CO2 Jet with attached quick connect fitting and base plate for stage use (non-mounting)
• 15’ foot (5 meter) long high pressure CO2 Cryo Hose with attached quick connect fitting.
• CO2 fitting (to connect hose to CO2 Tank)
• 3 Pin DMX Cable (15’ foot long).
• Power Cable
• Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)

The hose and CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the CO2 Jet when not in use. Electricity is required for this package. Simply connect the hose to the CO2 Jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the CO2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX "on" (to use with DMX 512 controllers) or "off" to use as a standard Cryo Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit).

This CO2 Jet shoots a 25'-35' foot (7.6-10.6 meters) high stream of CO2 which is about 4'-6' feet wide! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation.

Hose length is customizable. If you desire a custom length hose or have any questions, please contact us:

Email- [email protected]
+1-8-555-CRYOFX
(+1-855-527-9639)