Co2 Clamp Cannon

CryoFX Co2 Clamp Cannon™ is the ultimate must have when considering a super simple Co2 Jet that can mount almost anywhere and be controlled easily by simply just adding power.

Taking a standard Co2 Valve and adding some aestethics and a nozzle, you get what you see here! Clean, conscise and ready to be activated on your show.

Constructed of a metal casing, the Co2 Clamp Cannon™ will last through rugged conditions such as tours, mobile applications, constant setup / strike and similar. 

With a True1 powercon connectors this Co2 Cannon requires a controller with momentary power control (power interruptor) as when power is applied the valve will open, and when power removed, valve will close. 

The entire unit with nozzle may be adjusted to release Co2 clouds at any angle if so desired by adjusting a fitting at the base of the unit.

This Co2 Clamp Cannon™ Jet comes in 110vAC and 220vAC with ability to be installed on truss or used on floor.

Built to withstand rugged conditions, the Co2 Clamp Cannon™ reaches distances of 35-55 feet (10.6-16.76 meters) [depending on atmospheric conditions and setup] and weighs only 6.3 Lbs (2.9Kg).

• 25 Watts
• 1000 PSI Rated
• 1.5m (5ft) Power Cord
• 12.2x3.5x7 inches (31x9x18cm) Hook Folded
• 12.2x3.5x12.2 inches (31x9x18cm) Hook Expanded
•  

These co2 cannons are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The CO2 dissipates immediately after coming out of the jet so the cloud vanishes in seconds after the user stops activation.

Hose length is customizable. If you desire a custom length hose or have any questions, please contact us:

Note: The input fitting can be adjusted to accommodate different setups and existing hoses you may have. Use the fitting selector option to customize the input fitting to that of your needs. Whichever fitting you select, the hose fitting will match this connection.